How to Apply NSG-PADAB for Pointing Lavatory and Bathroom
First of all, it is important to note that for applying NSG-PADAB past, the surface should be free of contamination. For this purpose, use wire brushes and strong detergents such as hydrochloric acid.
After cleansing the surface, knead the NSG-PADAB paste for a few minutes to make its content perfectly unified. In the next step, apply the NSG-PADAB paste in the joints and do the pointing with the finger pressure. Another important thing to do is to use a damp cloth to remove the extra grout from the tile surface. It is said that say that NSG-PADAB paste dries completely after 5 hours.
If the joints should be in a specific color, it is possible to mix the NSG-PADAB paste with powder paints. The remarkable point is that the paste should be used once it leaves the tube. It is better to mix NSG-PADAB paste with the paint in a separate container and at various stages. In addition, the surface should be completely dry. After drying, there may be some cracks on the surface that need to be re-applied on these points.
In order to prevent NSG-PADAB color blurring, use NSG-Z90. This %100 waterproof product acts as a protective coating on NSG-PADAB paste, and both waterproofs the surface and prevents discoloration of the NSG-PADAB paste.
So hopefully by using nanomaterials such as NSG-PADAB on the joints of the walls of the lavatories we can help to achieve environmental cleanliness.
Buy this product