Nano Sealing
Sealing and insulation is the most important part of the primary security of the structures. If the concrete and cement structures are not protected against the influx of water and moisture, the infiltration of moisture into the depth of the structure will cause corrosion and decay of concrete and bars, reducing the service life of the structure. NSG nano-sealing materials and sealants, such as N50, increase the strength coefficient and fill the small cavities in the structure.
One of the best solutions to overcome these problems is to use small amounts of P.P fibers to control the growth of cracks and increase the tensile strength of concrete with the use of a small amount of NSG-N50 product.
In fact, fiber-reinforced concrete is an advanced type of technology that new natural and synthetic fibers along with NSG-N50 nano-sealing material increase the strength coefficient and significantly reduce water penetration.
In addition to the fact that NSG water-base materials are compatible with the components of the structure, they can maximize the penetration ability and penetration coefficient of nanoparticles, and also prevent the structure from freezing.
Sealing and Insulation property of nano-sealing Materials are based on nano and micro acrylic particles. While participating in the hydration reaction, these materials increase the adhesion coefficient between the components of the structure and prevent the penetration of other particles such as water.
NSG nano-sealing materials are not only used in sealing and insulation, but also in improving cement laying as well as the storage conditions of concrete, and cement mortars. NSG nano-sealants are easy to use and can be widely used.
The NSG-N50 is composed of acrylic polymer emulsion based on activated nano-resins. These materials, both strengthen and insulate the structures. A thin layer of this product is enough for deep or surface sealing.
The flexibility and elasticity of these materials are to a controlled extent and they are suitable for different structures. Because they are nanoparticles and are composed of fine-grained pigments, they can seal the structure by penetrating the concrete depth and block the entrance holes in concrete and mortar.
The highest consumption amount of NSG nano-sealing products, which nanoseal the structures, are in tiling, stone working, flooring and concrete placing of traffic places as well as all places that require high-strength, and in historical places that need to be repaired and restored e.g. in the restoration and reconstruction of mosques, historical buildings, sculptures, as well as public thoroughfares. NSG-N50 acts very strongly in this area.
Some remarkable characteristics of NSG nano-sealing products are as follows:
- They have no pollution and environmental damages.
- They are easy to use.
- They are paintable.
- They are not in danger of fire.
- They have good adhesion to different surfaces.
- They are anti-bacterial, anti-moss, anti-algae and anti-germs.
- They are actively involved in the hydration of cement mortars and prevent the formation of porosity in concrete.
- Since they are % 100 compatible with building materials they have a life equivalent to cement.
- They are very resistant to sunlight.
- They are easily applicable to all types of building surfaces.
- Any other coating can be used on these materials and there is no need to install fence and mesh.
Unique operational properties, in implementation, compatibility with technical and environmental principles, and time and cost saving are the most demanding advantages of these products.
In principle, nano-insulation in buildings, concrete projects and reservoir structures, if considered from the beginning, will significantly reduce costs. In general, sealing the structures with micro molecules is economical, with long service life, and easy to use. Obviously, we must keep in mind that not all the claims and claimers should be accepted.
Any material called nano is not suitable for insulation and sealing of structures, and its performance and penetration must be tested.
Methods of controlling and testing the amount of penetration and performance of nano-sealing materials and nano-sealants are different. The laboratory tests are inexpensive.
NSG Co. has given all its products, including all kinds of nano-sealing and nano-strengthening products, to authentic and licensed laboratories, and is ready to share the results with its clients and construction projects.
Therefore, according to all above descriptions it is recommended to use nano-sealing products in concrete placing, cement laying; producing the waterproof mortars, and tiling; nano-insulating and sealing lavatories, swimming pools, saunas, Jacuzzis, traffic places; and restoration, reconstruction, sealing and insulating ancient monuments, but great care must be taken in selecting such materials and suppliers.
