- Clean the surface from any contamination and other materials such as aquarium glue, etc. Then wash it, and wait until it dries completely.
- Massage the PADAB tube for 1 minute, then open the lid and inject the gel in the space between the sink and the wall or other surfaces and guide the gel to the empty spaces by pressing your fingers.
- Wait about 2 hours until the initial setting occurs and the gel dries. Up to 24 hours after the initial setting, strong detergents, as well as acidic or alkaline substances should not be used in the sink until the setting is finished and the gel is completely hardened.
- If excessively wide or deep cracks are observed after the initial drying of the gel, inject some more gel again on the cracked parts.