Façade resin is applied for various reasons such as preventing moisture and water intrusion, brick and stone efflorescence, as well as pale and corrosion of the building materials due to acid rains and sunlight. Most architects use these products for facade insulation. Oil-based resins are destroyed and discolored after one year and lose their quality due to sunlight.
NSG Co. is the leading company in the field of nanotechnology-based resins. These resins seal the façade and make it glossy simultaneously. These materials are not destroyed over time because they intrude into the texture of the stone or mortar. In addition, they are not exfoliated at all as do not form any layer on the surface. Among the important characteristics of these materials, resistance to acidic and non-acidic detergents, UV rays, CO2 gas and temperatures between -75° C to +350 ° C, as well as acting as anti-moss and anti-algae materials are remarkable. Therefore, these products are able to control positive and negative moisture pressures.
These products are applicable on a variety of surfaces such as wooden, brick, stone surfaces and permeable surfaces such as cement, concrete, plaster, etc.
As façade resins, NSG-Z90 and NSG-P100 are used.
NSG-Z90
This product can be used in pure form without mixing with cement grout to resin all locations and façades where the color of the surface should not change. NSG-Z90 does not intrude into petroleum materials.
NSG-P100
This product can be used in pure form without mixing with cement grout to resin all locations and façades. It seals the surface and makes it glossy and lacquered. NSG-P100 does not intrude into petroleum materials like NSG-Z90.
NSG-Z90 and NSG-P100 can be combined with all acrylic and water-based paints, and prevent efflorescence, exfoliation, and blistering.
Buy this product
