The wood surface is a good habitat for the growth and proliferation of a variety of fungi and insects in the humid and sultry weather, that cause spoilage and decay of the wood.
As fungi need air and water to live, we must either put the wood in the water to prevent the air to reach the fungi or quickly dry the wood to restrain the water that is necessary for feeding the mushrooms on the wood. Hence, the wood is quickly dried after the tree is cut down and chopped, decreasing the moisture to under %20.
One of the assured ways for extending the service life of the wood and make it resistant to decay and insect attack is to the chemical protection of the wood by smearing and saturating it with chemicals.
NSG-Z90 and NSG-P100 are among the specialized products of NSG Co that can be used as resins on the raw wood surface and prevent water and moisture intrude into the wood.
NSG-P100 that intrudes properly into the surface can be mixed with water and acrylic paints in 1 to 3 ratio (1 unit of NSG-P100 and 3 units of water or paint), due to its high concentration it and be applied two/three times with a brush or pistol on the wood surface and glosses it. In this way, it both prevents water intrusion and beautifies the surface.
NSG-Z90 has also a sealing property and can be used on wooden surfaces. It does not change the appearance of the surface, unlike NSG-P100, which is lacquered and hard and makes the surface glossy.
Buy this product