Products of NSG Specialized and Engineering Group
NSG group specializes in the insulation industry and supplies materials and additives for sealing, and strengthening. These products are all German-made based on nanotechnology. NSG-Z90, NSG-B70, NSG-N50, NSG-P100, NSG-PADAB, NSG-MA700, NSG-SQ2000, NSG-P.P, NSG-PLC, and NSG-SI30 are some of these products.
NSG-Z90 is a milky liquid with % 100 sealing property that becomes entirely colorless after application. This material is used as a final and ware proofing coat on the surfaces such as pool, cement facades, concrete tanks for drinking or sewage water, roofs, toilets, etc. As it penetrates in the surface of the structure, it is able to seal any surface completely.
NSG-B7 is used as a sealing adhesive for insulating cement mortars as well as strengthening and increasing adhesion coefficient of the mortar.
NSG-N50 is used to increase the strength of the adhesion coefficient in flooring and stone work.
NSG-P100 is a liquid with % 100 sealing property as the alternative of NSG-Z90 in the spots where surfaces need to be polished. It is also used in humid and sultry areas due to its high concentration.
NSG-PADAB is a ready-to-use gel to repair joints and cracks of toilets, bathrooms, swimming pools, Jacuzzis, terraces, kitchens and all places that may be destroyed by moisture. It is antibacterial, anti-moss and anti-algae, and is resistant to all acidic and industrial detergents.
NSG-MA700 is in the form of a powder and has the property of setting in less than three minutes. It is used to control the apparent water flow in places where there is water flow on the concrete surface and concrete walls.
NSG-SQ2000 is a powder that penetrates into the concrete and mortar after application. It reacts with water and lime of the cement, and blocks the small tubes and capillaries of the concrete by producing crystalline. It is able to control the negative moisture.
NSG-P.P is a product consisting glass fibers as a replacement of the reinforcing bars in the concrete that does not allow surface and deep cracks are created by increasing the flexural and tensile strength.
NSG-SH7 is a superplasticizer that increases the slump of concrete while reducing the amount of water used in concrete, so the concrete prepared with NSG-SH7 has a higher final strength.
NSG-PLC is a very good option for controlling tensile and bending stresses as well as the stresses caused by temperature fluctuations in cement and gypsum mortars due to its light weight and high strength.
NSG-SI30 is a substitute for aggregates in mortar. This product is also used instead of stone powder and sand. It is offered in three sizes with a purity of over 98%.
Let us prevent future problems in the structures with specialized products of NSG Co.