Pool Sealing with NSG Co. Products The pools have different finishing layers among which the cement membrane is discussed underneath: As NSG products are water-based and are not able to adhere strongly to the oil-based surfaces, the surface should be free of any extraneous material by exfoliating the surface. Step 1 Clean the entire surface…
Façade resin is applied for various reasons such as preventing moisture and water intrusion, brick and stone efflorescence, as well as pale and corrosion of the building materials due to acid rains and sunlight. Most architects use these products for facade insulation. Oil-based resins are destroyed and discolored after one year and lose their quality…
The stages of sealing the cement surface are as follows: Clearing: First, clear the surface from dust, grease, petroleum materials, and all other materials that prevent adhesion and intrusion of insulation products from the surface. In addition, remove all loose spots by hatchet, chisel or angle grinder. Sealing the cementitious-surface roofs: Apply NSG-N50 repair mortar:…
The wood surface is a good habitat for the growth and proliferation of a variety of fungi and insects in the humid and sultry weather, that cause spoilage and decay of the wood. As fungi need air and water to live, we must either put the wood in the water to prevent the air to…
Sealing Disregarding the principles of construction as well as not using up-to-date modern technologies and in other words, non-substantial construction may cause civil engineers to face problems in metropolises. One of these problems is the groundwater intruding as the underground moisture and dampness into the negative floors, causing erosion and shortening of the service life…
Pool Construction and Sealing Steps Pool Construction and Insulation by NSG Specialized Engineering Company Appropriate location and conditions should be provided first before the construction begins. Construction and sealing the pools are described in the following steps: Step 1: Excavating and Transferring Debris In this step, the location is excavated and the generated debris is…
Jacuzzi Insulation Jacuzzi manufacturing and insulation steps with NSG products Excavation and construction waste transportation: The place is excavated appropriate machinery and then the construction waste is transported. Revetment and drainage: After excavation and transportation of the construction waste, revetment implementation and drainage of the floor are done in addition to concrete placement. It is…
Why isogum and gypsum? NSG has been conducting extensive research in the field of sealing and insulation methods for the structures in Iran since 2000 and has introduced the best products of the world according to the latest technology in Iran. Meantime, NSG has been succeeded in all projects and great challenges involved in relying…
