Sloping Sloping and flooring are not separate from the insulation and sealing layer, as well as the reinforcement of the structure. Each of these cases is completely interrelated with others and acts as the foundation of the next layer. This means that we need to be knowledgeable enough of insulation, sealing and strengthening if we…
Products of NSG Specialized and Engineering Group NSG group specializes in the insulation industry and supplies materials and additives for sealing, and strengthening. These products are all German-made based on nanotechnology. NSG-Z90, NSG-B70, NSG-N50, NSG-P100, NSG-PADAB, NSG-MA700, NSG-SQ2000, NSG-P.P, NSG-PLC, and NSG-SI30 are some of these products. NSG-Z90 is a milky liquid with % 100…
NSG-N50 Impacts on Fresh Concrete Although most of NSG-N50, water-reducing additives and bubble-forming materials have similar impacts on the fresh concrete, it is remarkable to remember that it also has other positive impacts on: Bleeding of fresh concrete: NSG-N50 causes a significant reduction in the rate and amount of concrete bleeding. Hydration process: NSG-N50 has…
Garden and Roof Garden Insulation The final surface of the garden and the roof garden is soil which is planted. Therefore, the first step for their insulation is to evacuate the soil so that we can access the main bearing surface of the structure. If there is a layer of the bituminous water proofer under…
Why Moisture Insulators of NSG Co.? Bituminous waterproofing and tar papers have been conventional insulation products for many years, and most people use them for insulating roofs, toilets, pools, etc. Nowadays, new products are being introduced which are appropriate substitutes for bituminous waterproofing and tar papers and have attracted much attention. Disadvantages of Bituminous Waterproofing…
The stages of sealing the cement surface are as follows: Clearing: First, clear the surface from dust, grease, petroleum materials, and all other materials that prevent adhesion and intrusion of insulation products from the surface. In addition, remove all loose spots by hatchet, chisel or angle grinder. Sealing the cementitious-surface roofs: Apply NSG-N50 repair mortar:…
Pool Construction and Sealing Steps Pool Construction and Insulation by NSG Specialized Engineering Company Appropriate location and conditions should be provided first before the construction begins. Construction and sealing the pools are described in the following steps: Step 1: Excavating and Transferring Debris In this step, the location is excavated and the generated debris is…
Jacuzzi Insulation Jacuzzi manufacturing and insulation steps with NSG products Excavation and construction waste transportation: The place is excavated appropriate machinery and then the construction waste is transported. Revetment and drainage: After excavation and transportation of the construction waste, revetment implementation and drainage of the floor are done in addition to concrete placement. It is…
